preloder
Scroll to top
  • Saint-Petersburg, Kolpino, Finlandskaya street, Building 31

en ru

HPP ™ – Alcohol based chromite composition (freezing effect)

Form and core purpose coating with freezing effect, based on chromite powder, created especially for steal casting. HPP ™ provides great protection against metal penetration and other defects in the most “problematic” areas of the casting so-called thermal sites, areas of casting, where the metal is cooled slowly.

Package

barrel 65L

Form and core purpose coating with freezing effect, based on chromite powder, created especially for steal casting. HPP ™ provides great protection against metal penetration and other defects in the most “problematic” areas of the casting so-called thermal sites, areas of casting, where the metal is cooled slowly.

Package

barrel 65L

Appliance

Coating can be applied on the molds and cores. Liquid glass, cement, furan resins can be used as binders. Distribution of the coating can be made by tassel, spreading, dipping and affusion.

Suitable viscosity necessary for the working process:

  • By using tassel/ brush – 21-25 sec
  • Spreading – 21 sec

You would preferably need a 4 mm nozzle pot.
A ready-to-use product can be applied in 4 hours. Coating distributes in one layer. After a short time, the surface will dry off and will become hard and resistance. To speed up the process, the paint can be set on fire and burn for 1-2 min.

Storage and processing

Product contains isopropyl alcohol, which is highly inflammable. Tanks should be stored tightly closed far from the fire or any other ignition sources. The static electricity formation must be prevented.

The working space must be highly ventilated and respiratory protection must be used by the stuff. Safety glows and glasses are also mandatory.

Appliance

Coating can be applied on the molds and cores. Liquid glass, cement, furan resins can be used as binders. Distribution of the coating can be made by tassel, spreading, dipping and affusion.

Suitable viscosity necessary for the working process:

  • By using tassel/ brush – 21-25 sec
  • Spreading – 21 sec

You would preferably need a 4 mm nozzle pot.
A ready-to-use product can be applied in 4 hours. Coating distributes in one layer. After a short time, the surface will dry off and will become hard and resistance. To speed up the process, the paint can be set on fire and burn for 1-2 min.

Storage and processing

Product contains isopropyl alcohol, which is highly inflammable. Tanks should be stored tightly closed far from the fire or any other ignition sources. The static electricity formation must be prevented.

The working space must be highly ventilated and respiratory protection must be used by the stuff. Safety glows and glasses are also mandatory.

Have questions?

+7 (812) 987 97 73

Head office phone

+7 (8) 911 097 00 53

Mobile phone

ab@estream.ee
+372 5800 4421

Company representative in Europe

Have questions?

+7 (812) 987 97 73

Head office phone

+7 (8) 911 097 00 53

Mobile phone

ab@estream.ee
+372 5800 4421

Company representative in Europe